Horizontal ribbon mixer

The horizontal double-shaft ribbon mixer is used to mix dry and powdery materials to achieve the purpose of mixing and mixing evenly. During mixing, the materials in the machine are subjected to the motion of two rotors moving in opposite directions, and perform compound motion. The double-shaft paddles drive the materials to rotate clockwise and counterclockwise along the inner wall of the machine slot. The materials near the axis rotate axially, and the axial direction is pushed from the inside to the sides. The outer spiral drives the materials near the barrel wall to rotate axially, and the axial direction is pushed from the sides to the inside, thus causing convection circulation and shearing and mixing in the barrel, completing the rapid and uniform mixing of the materials in a relatively short time.
Product Features:
1. It adopts a U-shaped barrel structure, which has stable operation, uniform mixing, no dead angle, clean unloading, and a wide range of applications.
2. It adopts inner and outer double-layer ribbons for staggered reciprocating mixing, with fast mixing speed and high uniformity
3. The bearings are at both ends of the mixer, so it is not easy for materials to enter, and the maintenance rate is low.
4. The screw conveyor is easy to load, and the feed port is flush with the ground, which is labor-saving and convenient to feed.
5. The internal structure and overall design materials have passed ISO9001 international quality system certification.
Working principle of horizontal twin-shaft ribbon mixer:
This machine consists of two parts: feeding and stirring.
1. Feeding part: The material enters from the feed hopper and is lifted into the mixer by the spiral blades and enters the mixing drum for stirring and mixing.
2. Mixing part: When the material enters the mixing drum and moves back and forth, the stirring and mixing effect is good.